TES-46 CAT-5 Lan Cable Tester HDC138

FEATURES:
    * Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables       and test
      all category UTP cables and hardware.
    * Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
    * Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
    * Locates wiring/connection errors (distance to the open or shout)
    * Measures cable length
    * Easy to use only : One button to select the test and two lines characters LCD display.
    * Low battery, Auto power off, long battery life (60 hours continuous)
SPECIFICATION:     
Display: Two lines characters LCD display (16 characters each)
Connector: RJ45 and BNC
Category: CAT5
Faults Status: Opens, Shorts, Reversed, Crossed, Split Pair.
Test Type: TEST provides a pass / fail report on the cable under test. In
case a failure has been detected, the display offers additional
diagnostic information.
LENGTH provides the length of each pair (in case a twisted pair
cable is being tested).
WIRE MAP provides the detail wiring for the cable.
Cable Length: Range 2 to 999 ft or 1.0 to 350 m.
Resolution 1 ft or 0.5 m.
Accuracy 5% + 3 ft or 5% + 1 m
Power: 6 pcs 1.5V size AAA alkaline battery.
Input Protection: The inputs withstand telephone ringing and loop voltages.
Size / Weight: 152 mm x 72 mm x 35 mm / Approx. 360 g
Environment Conditions     Operating : 0 ℃ to +50 ℃ , Storage : -20 ℃ to + 60 ℃
Accessories: Instruction manual , Carry case , One UTP Category 5 patch
cable, One RJ45F - RJ45F female coupler, Cable identifier #1 for the verification of the wire map.